Prepares, mixes and applies paint and protective coatings to vehicles. Cleans, sands and masks surfaces, matches colours, applies primers and finishes, inspects and polishes painted panels, maintains equipment and follows safety procedures.
# Job Description – Vehicle Spray Painter ## Job Purpose The Vehicle Spray Painter is responsible for preparing, mixing and applying paint and protective coatings to vehicles to restore, repair or enhance their appearance. The role involves surface preparation, colour matching, spray painting, finishing and quality inspection, ensuring that all work meets established quality standards and health and safety requirements. ## Key Duties and Responsibilities ### 1. Surface Preparation - Inspect vehicle panels and surfaces to assess their condition before painting. - Clean, degrease, sand and prepare vehicle surfaces for painting. - Remove imperfections, rust and existing paint where necessary. - Apply fillers, primers and undercoats to achieve a smooth and even surface. - Ensure all prepared surfaces are free from dust, grease and other contaminants. ### 2. Masking and Protection - Mask and protect windows, trims, lights, tyres and other vehicle components that do not require painting. - Use appropriate masking materials to prevent overspray and damage to surrounding surfaces. - Remove masking materials carefully after painting. ### 3. Paint Mixing and Colour Matching - Identify and match vehicle paint colours according to manufacturer specifications. - Mix paints, hardeners, thinners and other materials in the correct proportions. - Use colour-matching systems and equipment where available. - Ensure consistency in colour, texture and finish across repaired and existing vehicle panels. ### 4. Spray Painting and Coating Application - Operate spray guns, compressors and associated painting equipment. - Apply primers, basecoats, clearcoats and protective coatings. - Carry out spray painting in designated spray booths or other approved work areas. - Apply paint evenly to achieve the required coverage, thickness and finish. - Follow manufacturer instructions regarding mixing ratios, application methods, drying and curing times. ### 5. Finishing and Quality Control - Inspect painted surfaces for defects, including runs, bubbles, dust contamination, uneven coverage and colour differences. - Carry out necessary corrections, including sanding, buffing and polishing. - Ensure completed surfaces achieve the required gloss, smoothness and colour consistency. - Verify that finished work meets company quality standards and customer expectations. ### 6. Equipment and Workplace Maintenance - Clean and maintain spray guns, nozzles, compressors and related equipment. - Maintain spray booths, filters and ventilation equipment in accordance with workplace procedures. - Keep tools, materials and work areas clean, organised and in good working condition. - Report equipment faults, defects or maintenance requirements to the supervisor. - Use paints and other materials efficiently to minimise waste. ### 7. Health, Safety and Environmental Compliance - Follow all applicable occupational health and safety procedures. - Wear appropriate personal protective equipment, including respirators, gloves, protective clothing and eye protection. - Handle paints, solvents, thinners and other hazardous substances safely. - Follow relevant safety data sheets and manufacturer instructions. - Ensure adequate ventilation when handling and applying coatings. - Store, handle and dispose of hazardous materials and waste in accordance with applicable regulations and company procedures. - Maintain a safe working environment for colleagues and other persons on the premises. ## Required Skills and Competencies - Knowledge of automotive spray painting techniques and refinishing processes. - Ability to prepare surfaces and apply primers, paints and protective coatings. - Understanding of paint mixing, colour matching and finishing techniques. - Ability to operate and maintain spray painting equipment. - Attention to detail and commitment to high-quality workmanship. - Good hand-eye coordination and manual dexterity. - Ability to identify and correct paintwork imperfections. - Understanding of workplace health and safety procedures. - Ability to work independently and as part of a team. - Good organisational and time-management skills. ## Qualifications and Experience - Previous experience in automotive spray painting, vehicle refinishing or a related field is preferred. - Relevant vocational training or certification in automotive body repair or spray painting would be considered an asset. - Familiarity with modern automotive paint systems and spray booth equipment is desirable. - Knowledge of safe chemical handling and the use of appropriate protective equipment is required. ## Working Conditions - Work is primarily carried out in an automotive workshop, body repair facility or designated spray painting area. - The role involves standing for extended periods, bending, reaching and performing manual tasks. - Regular exposure to paints, solvents, dust and other workshop materials requires strict adherence to safety procedures. - Appropriate protective equipment must be worn when undertaking relevant duties. ## Expected Performance Standards The successful candidate will be expected to: - Complete assigned painting tasks to a high professional standard. - Produce consistent, accurate and high-quality finishes. - Meet agreed work schedules while maintaining workmanship standards. - Minimise material waste and avoid unnecessary rework. - Maintain equipment and working areas in a safe and orderly condition. - Comply with company procedures and applicable health, safety and environmental requirements. **Note:** The employee may be required to perform other reasonable duties related to vehicle painting and refinishing, consistent with the nature of the position.
If multiple Education and Language Profiles are defined, please note that you must fit at least one of them, but not necessarily all.
